Fall has always been the season when I really get my creative juices flowing. During one Fall season I was dabbling in quilted and embroidered leaf ornaments, buntings or garlands, and 3D mini-quilts.
This free e-book shows you how to make the 7 different leaf ornaments shown in the picture above.
So, here’s how to make my embroidered ornaments:
Supplies Needed:
For the fabrics you need to buy enough of the Fall seasonal theme fabric for the number of leaf ornaments you will be making.
DMC Embroidery Floss - Various Shades of Brown to Match Your Fabrics
Sewing Pins
Embroidery Needles
Iron–On Interfacing
Warm & Natural or Batting
Scissors
Instructions:
1. All seam allowances are ¼” unless otherwise stated.
2. RST = Right Sides Together
3. WST = Wrong Sides Together
4. RSO = Right Sides Out
5. WSO = Wrong Sides Out
6. Iron fabric pieces and seams as required.
7. Trace all pattern pieces onto tracing paper or tissue paper, copy, or use the enclosed pattern pieces directly.
8. Cut all fabric pieces outside of black mark lines as shown on the pattern.
There are 7 different size leaves in this e-book. The leaves will be of different sizes but they are basically all made and embroidered the same way.
How To Make Seven Different Embroidered Leaf Ornaments
1) Start with the fabric you have chosen for ornament #1 and cut two leaf pieces out WST as indicated in the leaf pattern pieces for leaf ornament #1. One will be for the front of the leaf and one will be for the back of the leaf.
Pictures of the pattern piece sheets are shown above. For full size pattern piece sheets please CLICK HERE to download the full size pattern piece sheets for all seven of the leaves from my free How To Make Embroidered Leaf Ornaments - Linda's How-Do-I Series? e-book.
2) Do the same for the fabrics you have chosen for the #2, #3, #4, #4, #6 and #7 leaf pieces cutting them out as indicated in their respective leaf pattern pieces and then set them aside.
3) Cut one piece out of warm and natural or batting to fit each of the 7 different leaves using their respective leaf pattern piece.
4) Cut two pieces of the iron-on interfacing to fit each of the seven different leaves using their respective leaf pattern piece. Trim around the edges of the interfacing 1/16” so your interfacing will be ironed on 1/16” from each of the respective leaf edges.
5) Start with leaf ornament #4 (as it’s the simplest leaf shape) and using the directions from your iron-on facing iron one of the iron-on leaf ornament #4 pieces you cut to the WS of one of the fabric leaf ornament #4 pieces you cut, as shown in Diagram #1 making sure your interfacing is 1/16” from the edge.
6) Do the same for the other iron-on leaf ornament # 4 piece you cut and the WS of the remaining fabric leaf ornament #4 piece.
7) Do the same for the iron-on leaf pieces and fabric leaf pieces you cut for leaf ornament #1, #2, #3, #5, #6 and #7.
8) Pin the front leaf piece for leaf ornament #4, warm and natural piece for leaf ornament #4, and back piece for leaf ornament #4 together so all the sides match and the warm and natural piece is in between the WS of the front and WS of the back leaf ornament #4 pieces, as shown in Diagram #2.
9) Trim the edges so they are even, if necessary.
10) Do the same for Leaf Ornaments #1, #2, #3, #5, #6, and #7.
11) Using the Basic Blanket Stitch Guide embroider a blanket stitch around the outer edges of leaf ornament #4 with 6 strands of the respective DMC embroidery floss for leaf ornament #4 and as shown in Diagram #3.
A picture of my blanket stitch guide is shown below. For a full size version of this guide please CLICK HERE to download the full size blanket stitch guide from my free How To Make Embroidered Leaf Ornaments - Linda's How-Do-I Series? e-book.
12) Do the same for Leaf Ornaments #1, #2, #3, #5, #6, and #7.
13) Using all six strands of the respective DMC embroidery floss cut a 12” long piece of the respective DMC embroidery floss for leaf ornament #4 and then knot one end of the DMC embroidery floss and insert the needle at the top of the center of the edge for leaf ornament #4 as shown in Diagram #4 and tighten.
14) Insert the needle again at the top of the center of the edge for leaf ornament #4, as shown in Diagram #4 and then tie a double knot at the other end to form the hanger covering your ends amongst the blanket stitching.
15) Do the same for leaf ornaments #1, #2, #3, #5, #6, and #7.
16) Using six strands of the respective DMS embroidery floss for leaf ornament #4 cut a piece of the DMC embroidery floss long enough so you can embroider all the vein lines without needing to cut another piece of floss.
17) You are working on a double sided ornament so using the Embroidery Stitch Guide for leaf ornament #4 you want to embroider a double running stitch on the front and back of the leaf ornament at the same time so you create the effect of vein lines, as shown for in Diagram #5.
18) Knot one end of the DMC embroidery floss and insert the needle in between the fabric and warm and natural layers along the top edge so as to cover the knot you are inserting in between the layers until you come out at the top of the center vein line at Point A, as shown in Diagram #6.
19) To create a double running stitch on both sides you are going to start at the top of the center vein line at Point A, as shown on Diagram #6, and embroider a running stitch down the center line and then embroider a running stitch back up the center line filling in the spaces in between your stitches until reaching the top of the center vein line at Point A again, as shown in Diagram #6.
20) After inserting your knot at the top edge of leaf ornament #4 and exiting at Point A on the front side, insert the needle at Point B on the front side and come out at Point B on the back side then insert your needle at Point C on the back side and come and come out at Point C on the top side, as shown in Diagram #6.
21) Insert your needle at Point D on the front side and come out at Point D on the back side then insert your needle at Point E on the back side and come and come out at Point E on the top side, as shown in Diagram #6.
22) Insert your needle at Point F on the front side and come out at Point F on the back side then insert your needle at Point G on the back side and come and come out at Point G on the top side, as shown in Diagram #6.
23) Insert your needle at Point H on the front side and come out at Point H on the back side then insert your needle at Point I on the back side and come out at Point I on the top side, as shown in Diagram #7.
24) Insert your needle at Point J on the front side and come out at Point J on the back side then insert your needle at Point K on the back side and come out at Point K on the top side, as shown in Diagram #7.
25) Insert your needle at Point L on the front side and come out at Point L on the back side then insert your needle at Point M on the back side and come out at Point M on the top side, as shown in Diagram #7.
26) Insert your needle at Point N on the front side and come out at Point N on the back side then insert your needle at Point M on the back side and come out at Point M on the top side, as shown in Diagram #7.
27) Insert your needle at Point L on the front side and come out at Point L on the back side then insert your needle at Point K on the back side and come out at Point K on the top side, as shown in Diagram #7.
28) Insert your needle at Point J on the front side and come out at Point J on the back side then insert your needle at Point I on the back side and come out at Point I on the top side, as shown in Diagram #7.
29) Insert your needle at Point H on the front side and come out at Point H on the back side then insert your needle at Point G on the back side and come out at Point G on the top side, as shown in Diagram #7.
30) Insert your needle at Point F on the front side and come out at Point F on the back side then insert your needle at Point E on the back side and come out at Point E on the top side, as shown in Diagram #7.
31) Insert your needle at Point D on the front side and come out at Point D on the back side then insert your needle at Point C on the back side and come out at Point C on the top side, as shown in Diagram #7.
32) Insert your needle at Point B on the front side and come out at Point B on the back side then insert your needle at Point A on the back side and come out at Point A on the top side, as shown in Diagram #7.
33) If you have enough floss left to continue embroidering the cross veins take a tiny stitch at Point A and re-insert your needle at Point A so your needle is between the fabric and warm and natural layers and come out at Point O, as shown in Diagram #8.
34) If you don’t have enough floss then take a tiny stitch at Point A and re-insert your needle at Point A between the fabric and warm and natural layers and come out at the top edge of the leaf ornament #4 and tie a tiny knot so it is hidden between the layers, too. Cut the end of the floss.
35) Cut a new length of floss long enough to finish embroidering the cross veins, knot one end, and insert between the layers of the fabric and warm and natural on the left side of the leaf ornament and come out at Point O, as shown in Diagram #8.
36) For the side veins you are going to embroider a double running stitch like the one you embroidered down and then up the center vein of the leaf ornament only this time you will be working from left to right starting at Point O on the left side and going across until reaching the right side of that side vein then going back in a right to left direction until reaching Point O again, as shown in Diagram #8.
37) Take a tiny stitch at Point O and re-insert your needle at Point O so your needle is between the fabric and warm and natural layers and come out at Point P, as shown in Diagram #8.
38) Starting at Point P on the left side embroider a running stitch going across until reaching the right side of that side vein then going back in a right to left direction until reaching Point P again, as shown in Diagram #8.
39) Take a tiny stitch at Point P and re-insert your needle at Point P so your needle is between the fabric and warm and natural layers and come out at Point Q, as shown in Diagram #8.
40) Starting at Point Q on the left side embroider a running stitch going across until reaching the right side of that side vein then going back in a right to left direction until reaching Point Q again, as shown in Diagram #8.
41) Take a tiny stitch at Point Q and re-insert your needle at Point Q so your needle is between the fabric and warm and natural layers and come out at Point R, as shown in Diagram #8.
42) Starting at Point R on the left side embroider a running stitch going across until reaching the right side of that side vein then going back in a right to left direction until reaching Point R again, as shown in Diagram #8.
43) Take a tiny stitch at Point R and re-insert your needle at Point R between the fabric and warm and natural layers and come out at the bottom edge of the leaf ornament #4 between the layers of fabric and warm and natural and tie a tiny knot so it is hidden between the layers, too. Cut the end of the floss.
44) You are going to embroider double running stitches for Leaf Ornaments #1, #2, #3, #5, #6, and #7 in the same manner as you did for leaf ornament #4 using the Leaf Embroidery Pages for each respective leaf as a guide.
Pictures of the leaf embroidery guide sheets are shown below. For full size leaf embroidery guide sheets please CLICK HERE to download the full size leaf embroidery guide sheets for all seven of the leaves from my free How To Make Embroidered Leaf Ornaments - Linda's How-Do-I Series? e-book.
When you are finished embroidering double running stitches for the remaining ornaments congratulate yourself. Your leaf ornaments are done.
I also created a free e-book for you showing how I made the embroidered fall ornaments shown in the picture at the top of this post and above.
To view and download my free e-book please CLICK HERE. You'll be brought to Google Drive where you can view my free e-book. Then just download my free .pdf e-book by clicking on the down arrow in the top center.
For more information on all my free e-patterns, e-printables and e-books please CLICK HERE.
Please respect My Terms of Use: All patterns, e-patterns, printables, e-printables, e-books, graphics, tutorials, how-to's, articles and other e-products © 2004-2023 Linda Walsh Originals-Designs by Linda Walsh. All rights reserved. Commercial selling or reselling by any means prohibited without the written consent of Linda Walsh.
Patterns, e-patterns, printables, e-printables, e-books, graphics, tutorials, how-to's, articles and other e-products are for personal use only. You may not modify, photocopy, download, upload, post, transmit, display, perform, publish, license, reprint, create derivative works from, mass duplicate, re-sell, digitize, and reproduce in any other form (print, digital or electric) or commercially apply, embed, share, Email, or redistribution in any other means. Use of any of the above is prohibited without the written permission of Linda Walsh.
Patterns, e-patterns, printables, e-printables, e-books, graphics, tutorials, how-to's, articles and other e-products are for personal use only. You may not modify, photocopy, download, upload, post, transmit, display, perform, publish, license, reprint, create derivative works from, mass duplicate, re-sell, digitize, and reproduce in any other form (print, digital or electric) or commercially apply, embed, share, Email, or redistribution in any other means. Use of any of the above is prohibited without the written permission of Linda Walsh.
However, you may link to my website(s)/blog(s) and the individual page(s)/blog post(s) (including 1 picture) but do not copy, reprint or duplicate my website(s)/blog(s) or individual page(s)/post(s ) without my permission.
Items made from Linda Walsh Originals E-Patterns are intended for personal use for fun or small scale personal and business profit as long as you credit us with the design. Large scale commercial use (i.e. mass production) of items made from Linda Walsh Originals E-Patterns are by permission only.
Please see my Terms and Conditions for additional information.
Copyright © 2004 - 2023 - All Rights Reserved - Written By Linda Walsh of Linda Walsh Originals and Linda's Blog. Linda is a doll maker and doll pattern designer.
No comments:
Post a Comment